s

Hydraulic Universal Tensile Testing Machine

  1. Home
  2. Products


Shanta Universal Testing machine is designed for testing Metals and other materials underTension , Compression, Bending, Transverse and Shear loads. Brinell Hardness Test on metals can also be conducted in smaller capacity UTM's.

All Shanta Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacturing. Every machine is than calibrated over each of its measuring range in accordance with the procedure laid down in BS 1610 and IS 1828. and comply with Grade “A” and Class 1.0 respectively

SERIES SE - UTE
DIGITAL ELECTRO-HYDRAULIC UTM WITH MICROPROCESSOR BASED PANEL FOR MEASUREMENT.

SERIES SE - UTES

COMOMPUTER CONTROLLED ELECTRO HYDRAULIC SERVO UTM

  • Shanta Universal Testing Machine are hydraulically operated.
  • Series SE-UTE is manually controlled with Microprocessor based Measuring Panel.
  • Through RS232 it can be connected to PC for on-line graphic display and data storage, Test report generation and many other features as per customer requirement.
  • Series SE-UTES is Computer controlled with computerized measurement.
  • Electronic Clip-on Extensometer can be attached to above machines for measurement of Modulus of Elasticity (MOE) and Proof Stress.
  • Wide range of accessories comprising Standard and Special accessories are available.

SERIES SE-UTN :
ELECTROHYDRAULIC UTM WITH DIAL DISPLAY AND AUTOGRAPHIC RECORDER.

Hydraulic Universal Tensile Testing Machine

  • Shanta Universal Testing Machine are hydraulically operated.
  • Series SE-UTN is manually controlled with Dial display. Dummy Pointer is provided to register peak load. Autographic recorder is attached to machine that gives Load-Displacement curve on a continuous chart paper.
  • Mechanical Clip-on Extensometer can be attached to above machines for measurement of Modulus of Elasticity (MOE) and Proof Stress with the help of manually drawn Load-Displacement curve.
  • Wide range of accessories comprising Standard and Special accessories are available.

    • MECHANICAL EXTENSOMETER

    MECHANICAL EXTENSOMETER

    TECHNICAL DATA
    • Gauge Length (In steps): 30-120mm
    • Measuring Range: 0-3mm
    • Specimen Thickness/Dia.: 1 to 20mm
    • Resolution: 0.01mm
    ELECTRONIC EXTENSOMETER

    MECHANICAL EXTENSOMETER

    TECHNICAL DATA
    • Gauge Length: 25mm & 50mm
    • Measuring Range: 0-2mm
    • Specimen Thickness/Dia. 0.5 to 30mm
    • Resolution: 0.001mm



    TECHNICAL DATA SERIES SE-UTN

    TECHNICAL DATA SERIES SE-UTN
    MODEL SE-UTM-10 SE-UTM-20 SE-UTM-40 SE-UTM-60 SE-UTM-100
    Maximum Capacity (KN) 100 200 400 600 1000
    Load ranges 4 4 4 4 4
    Measurement Range 2-100%FN 2-100%FN 2-100%FN 2-100%FN 2-100%FN
    Accuracy Class as per BS-1610 & IS1828 Class 1.0 Class 1.0 Class 1.0 Class 1.0 Class 1.0
    Clearance for Tensile (mm) 50-700 50-700 50-700 50-800 50-850
    Clearance for Compression
    test (mm)    		 0-700 0-700 0-700 0-800 0-850
    Clearance between Columns
    (mm)    		 500 500 500 600 750
    Ram Stroke (mm) 150 200 200 250 250
    Straining/piston Speed at no
    load (mm/min)    		 0-300 0-150 0-150 0-100 0-80

    CONNECTED LOAD

    Model SE-UTM-10 SE-UTM-20 SE-UTM-40 SE-UTM-60 SE-UTM-100
    HP 1.5 1.5 2.5 2.5 3.5
    Power Supply 400-440V, 
    50Hz,3-Phase    		 400-440V,
    50Hz,3-Phase    		 400-440V,
    50Hz,3-Phase    		 400-440V,
    50Hz,3-Phase    		 400-440V,
    50Hz,3-Phase
    Dimension (LXHXH) 2032 X 750 X 1960 2032 X 750 X 1960 2060 x 750 x 2180 2265 x 750 x 2534 2415 x 815 x 2900
    Weight (kgs) 1500 1500 2500 3500 5500

    STANDARD ACCESSORIES :

    MODEL SE-UTM-10 SE-UTM-20 SE-UTM-40 SE-UTM-60 SE-UTM-100
    For Tension Test          
    Clamping jaws for round specimen Dia, (mm) 10-20
    20-30    		 10-20
    20-30    		 10-25
    25-40    		 10-25
    25-40
    40-55    		 10-25
    20-45
    45-70
    Clamping jaws for flat 
    specimen (mm)    		 0-10
    10-20    		 0-10
    10-20    		 0-15
    15-30    		 0-15
    15-30    		 0-22
    22-44
    44-65

    Specimen Width (Max.)

    		 50 50 65 70 70

    For Compression Test

    		          
    Pair of Compression Plates,
    Dia (mm)    		 120 120 120 120 160
    For Transverse Test          
    Table w adjustable Rollers,
    Width of Rollers (mm)    		 160 160 160 160 160
    Diameter of Rollers (mm) 30 30 30 50 50
    Maximum Clearance
    between supports (mm)    		 500 500 500 600 800
    Radius  of Punch Tops (mm) 6,12 6,12 12,16 16,22 16,22

    OPTIONAL ACCESSORIES : These include Load stabilizer, Brinell Test Attachment, Mechanical Extensometer, Electronic Extensometer, Shear Test Attachment, 1800 Bend Test Attachment etc.

    Universal Testing Machines